background image

11

0dB

D.BASS-3

D.BASS-2

D.BASS-1

D.BASS-3

D.BASS-2

D.BASS-1

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass
sound. The D-bass function boosts the low
frequency signal and high frequency signal
with a sharper curve than conventional bass
boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
easily with the D-BASS control.

Adjusting the bass curve

Press 

(D-BASS)

 repeatedly to select the

desired bass curve.

As the D-BASS number increases so does
the effect.

D.BASS-1 

t

 D.BASS-2 

t

 D.BASS-3 

t

D.BASS-OFF

Note
The bass sound may distort at same volume. If the
bass sound distorts, select less effective bass curve.

Level

Frequency (Hz)

With Optional Equipment

CD/MD Unit

This unit can control a maximum of ten
external CD/MD units in this configuration:
CD unit – maximum of five
MD unit – maximum of five
Any combination up to ten will work.
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a CD
TEXT disc.

Playing a CD or MD

1

Press 

(SOURCE)

 repeatedly to select CD

or MD.

2

Press 

(MODE)

 until the desired unit

appears.

CD/MD playback starts.

When a CD/MD unit is connected, all the
tracks play from the beginning.

Changing the display item

Each time you press 

(DSPL)

 during CD, CD

TEXT, or MD playback, the item changes as
follows:

V

Elapsed playback time

V

Disc name

*

1

/Artist name

*

2

V

Track name

*

3

*

1

If you have not labeled the disc or if there is no
disc name  prerecorded on the MD, “NO NAME”
appears in the display.

*

2

If you play a CD TEXT disc, the artist name
appears in the display after the disc name.
(Only for CD TEXT discs with the artist name.)

*

3

If the track name of a CD TEXT disc or MD is not
prerecorded, “NO NAME” appears in the
display.

After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.

Continued to next pane 

t

Summary of Contents for XR-C2604J



















Reviews: