Help Guide | Adjusting the AV sync setting
04-06_02.html[3/31/2021 7:20:07 AM]
1
>
Using the TV with Other Devices
>
>
Adjusting the AV sync setting
Adjusting the AV sync setting
If a Bluetooth audio device is connected, there may be a delay between
the picture and sound due to the properties of Bluetooth. You can adjust
the delay between the picture and sound with the A/V sync setting. (Only
for Bluetooth A2DP-supported models that can use Bluetooth audio
devices.)
Bluetooth A2DP-supported models that support Bluetooth audio devices
have [A/V sync] in [Settings] — [Display & Sound] — [Audio output].
Press the
(Quick Settings) button on the remote control,
then select [Settings] — [Display & Sound] — [Audio output]
— [A/V sync] — the desired option.
Hint
You can also adjust the output timing of the picture and sound if a
specific audio system is connected with an HDMI cable. For details
about supported models, refer to the support site.
Note
Depending on the connected Bluetooth audio device, the picture
and sound may not match even when the [A/V sync] setting is set
to [On] or [Auto].
To prevent the TV from displaying a black screen immediately after
turning it on when a sound bar is connected wirelessly (Bluetooth),
set the [A/V sync] setting to [On].
If [Picture mode] is set to one of the options below, the output
Using the TV with Other Devices
306
Search
Summary of Contents for XR-83A90J
Page 149: ...Help Guide Troubleshooting 08 html 3 31 2021 7 16 09 AM 143 ...
Page 185: ...Help Guide Connecting terminal 01_10 html 3 31 2021 7 16 56 AM 179 ...
Page 285: ...Help Guide Playing content stored on a USB device 04 01_01 html 3 31 2021 7 19 28 AM 279 ...
Page 410: ...Help Guide Videos 04 01 03_03 html 3 31 2021 7 23 18 AM Copyright 2021 Sony Corporation 404 ...