Sony XR-83A90J, Help Manual, Page: 184 / 413

Help Guide | Connecting terminal
01_10.html[3/31/2021 7:16:56 AM]
control, and set [Speakers] to [Audio system] from
[Settings] — [Display & Sound] — [Audio output].
Note
Before connecting cables, disconnect the AC
power cord (mains lead) of both the TV and
AV receiver.
If you do not use the CENTER SPEAKER IN
terminal or the S-CENTER SPEAKER IN
​
terminal, you will need to perform the
following steps to prevent noise from the
speakers.
Press the
(Quick Settings) button on the
remote control, and disable [TV center
speaker mode] in [Settings] — [Display &
Sound] — [Audio output].
S-CENTER SPEAKER IN ​
Connects the TV and an audio device with an S-
CENTER OUT terminal using a TV center speaker
mode cable. Before connecting, make sure you
unplug the AC power cord (mains lead) of the TV and
audio device to be connected.
For details, refer to
Using the TV as a center speaker
(only models with TV center speaker mode) .
Note
If you do not use the CENTER SPEAKER IN
terminal or the S-CENTER SPEAKER IN
​
terminal, you will need to perform the
following steps to prevent noise from the
speakers.
Press the
(Quick Settings) button on the
remote control, and disable [TV center
speaker mode] in [Settings] — [Display &
Sound] — [Audio output].
>
Getting Started
>
Connecting terminal
Go to page top
F-232-100-12(2)
Copyright 2021 Sony Corporation
178