Sony XR-1804 Operating Instructions Manual Download Page 7

7

EN

FM

ST

TUNER

A  MEM

TUNER

A  MEM

TUNER

A  MEM

TUNER

A  MEM

SEEK

MANU

SEEK

MANU

TUNER

A  MEM

Tuning in by Adjusting the
Frequency

 — Manual Tuning

1

Select the desired band.

2

Press and hold either side of the SEEK/
MANU button.

Release the button when the desired station
is received.

PREVENT ACCIDENTS!

When tuning in during driving, use the
automatic tuning and the memory preset
tuning instead of the manual tuning.

Memorizing Stations
Automatically

— Automatic Memory Function

Stations with the clearest reception are
automatically searched and memorized on
each band (FM1, FM2, MW, SW1 and SW2).
Up to 6 stations on each band can be stored on
the preset number buttons 1 to 6 in the order of
band frequency.

1

Select the desired band.

2

Press the TUNER/A MEM button for more
than two seconds.

The unit will be start scanning the selected
band and memorize the tuned stations on
the preset number button 1 through 6
automatically.

Memorizing Only the

Desired Stations

1

Select the desired band.

2

Tune in the station which you wish to
store on the preset number button.

3

Press and hold the desired preset

number button (

ATA

1

 to 

6

) for about

two seconds until you hear a beep tone.

The number of the pressed preset number

button appears in the display window.

Up to 6 stations on each band (FM1, FM2, MW, SW1 and

SW2) can be stored on the preset number buttons in the
order of your choice. Therefore, 12 stations can be
memorized on FM.

If you try to store another station on the same preset

number button, the previously stored station will be
erased.

Receiving the Memorized

Stations

1

Select the desired band.

2

Press momentarily the preset number
button on which the desired station is
stored.

Note

If you press the preset number button for more than two

seconds, the currently received station will be memorized.
To receive the previously memorized station, make sure
that the preset number button is pressed only momentarily.

For lower
frequencies

Cassette Player Operation/Radio Reception

FM1 

n

 FM2 

n

 MW 

n

 SW1

n

 SW2 

n

 FM1

FM1 

n

 FM2 

n

 MW 

n

 SW1

n

 SW2 

n

 FM1

FM1 

n

 FM2 

n

 MW 

n

 SW1

n

 SW2 

n

 FM1

For higher
frequencies

FM1 

n

 FM2 

n

 MW 

n

 SW1

n

 SW2 

n

 FM1

Summary of Contents for XR-1804













Reviews: