To Connect to a Wi-Fi® Network Using a WPS Button
1
From your Homescreen, tap .
2
Find and tap
Settings
>
Wi-Fi
.
3
Turn on Wi-Fi® if it is not already on.
4
Tap >
Advanced
>
WPS Push Button
, then press the WPS button on the
WPS-supported device.
To Connect to a Wi-Fi® Network Using a WPS PIN
1
From your Homescreen, tap .
2
Find and tap
Settings
>
Wi-Fi
.
3
Turn on Wi-Fi® if it is not already on.
4
Tap >
Advanced
>
WPS PIN Entry
.
5
On the WPS-supported device, enter the PIN that appears on your device.
Sharing your mobile data connection
You can share your mobile data connection with other devices in several ways:
•
USB tethering
– share your mobile data connection with a single computer using a USB cable.
•
Bluetooth® tethering
– share your mobile data connection with up to five other devices via Bluetooth®.
•
Portable Wi-Fi® hotspot
– share your mobile data connection simultaneously with up to 8 other devices,
including devices that support WPS technology.
To Share Your Data Connection Using a USB Cable
1
Deactivate all USB cable connections to your device.
2
Using the USB cable that came with your device, connect your device to a
computer.
3
From your Homescreen, tap .
4
Find and tap
Settings
>
More
>
Tethering & portable hotspot
.
5
Drag the slider beside
USB tethering
to the right, then tap
OK
if prompted. is
displayed in the status bar once you are connected.
6
To stop sharing your data connection, drag the slider beside
USB tethering
to
the left or disconnect the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
To Share Your Cellular Data Connection with Another Bluetooth® Device
1
Be sure your device and the Bluetooth® device are paired with each other and
that cellular data traffic is activated on your device.
2
Your device
: From your Homescreen, tap .
3
Find and tap
Settings
>
More
>
Tethering & portable hotspot
and then drag the
slider beside
Bluetooth tethering
to the right.
4
Bluetooth® device
: Set up the device so it obtains its network connection using
Bluetooth®. If the device is a computer, refer to the relevant instructions to
complete the setup. If the device runs on the Android™ operating system, tap
the settings icon beside the name of the device it is paired with under
Settings
>
Bluetooth
>
Paired devices
, then mark the
Internet access
checkbox.
5
Your device
: Wait for to appear in the status bar. Once it appears, the setup
is complete.
6
To stop sharing your cellular data connection, drag the slider beside
Bluetooth
tethering
to the left.
The
Bluetooth tethering
function is turned off every time you turn off your device or turn off the
Bluetooth® function.
For more information about pairing and turning on cellular data, see
To pair your device with
another Bluetooth® device
on page 114 and
To add a virtual private network
on page 36.
33
This is an Internet version of this publication. © Print only for private use.