Test Instructions (mech)
1261-4720 Rev 2
Sony Mobile Communications AB
– Company Internal
22(25)
Tests: Manual Tests
2.3.4
Charging via USB
(Charger or Computer)
Verify that the phone can charge the battery by a USB port:
Ensure that no computer application, such as PC Suite
or Emma, is active!
Do not start the phone.
Connect a USB cable from a computer or charger to the
phone.
Verify that the phone is being charged by the notification
LED and Battery icon in the display.
Remove the USB cable from the connector and verify that
the notification LED and Battery icon no longer indicates
charging.
Sony Ericsson
SONY
at&t
The Notification LED colour status is depended on battery
remaining capacity:
Red: Battery level is between 1% and 10%;
Orange: Battery level is between 11% and 89%;
Green: Battery is between 90% and 100%;
If above fails, perform below Diagnostic battery / Charging
Status check.
Perform a force shut down (Press Power key + Volume Up
for 10sec). If phones vibrate three times the shutdown is
performed. If no vibration is detected, the battery might be
discharged.
Sony Ericsson
SONY
at&t
Diagnostic Battery / Charging Status
Check
Check
State / check
decision
Start / state
Force Power down
(Press power key +
volume up key for 10
sec)
Connect Charger
Led light on
and Charging
icon
Red Led ON
Charging OK
Charging 30 min
Start, Power key
Normal start
after Power
on
Continue Trouble
Shoot
No
Yes
Yes
No
No
Yes
Led Light
Charging icon
Please leave it
several minutes
to decide (up to
~10 min)
