66
Recording Timecode and User Bit Data
Chap
ter
5
Set
ting
and
Re
c
o
rdin
g T
ime
Da
ta
1) The internal timecode generator begins
to advance at the instant of completion of
the setting.
2) Starting and stopping of the internal
timecode generator advance is linked to
starting and stopping of video and audio
recording.
2
Set “TC Format” of the TC/UB SET
menu to “DF” (drop frame) or “NDF”
(non-drop frame) when the system
frequency is 60i or 60P.
3
Select “Setting” in the “Timecode” or
“User Bit” setting of the TC/UB SET
menu.
The current setting is shown on the
monitor screen.
4
See steps
1
and
2
in “To enter a
and enter
the value.
Enter hexadecimal values (0 to 9, A to
F) when setting user bit data.
To set a value of 00:00:00:00
Select “Reset” in the “Timecode”
setting of the TC/UB SET menu and
select “Execute”, then go to step
5
.
5
Press the SET button.
The new settings are saved in the
memory of the unit.
The new setting may be lost if you power
off the unit during the saving operation.
Wait until the saving operation is completed
before powering the unit off.
Recording timecode to
continue from previously
recorded timecode (Regen
mode)
When the recording format of this unit is set
to be the same as on the SxS memory card,
you can record timecode consecutively
from the timecode already recorded.
To do this, set “Mode” in the “Timecode”
setting of the TC/UB SET menu to
“Regen”. When recording starts, the
timecode on the memory card is read, and
this unit internally generates and records
continuing timecode.
Synchronizing the internal
timecode generator to an
external timecode
—External synchronization
(Ext regen mode)
You can synchronize the internal TC
generator to an external timecode
(embedded in the HDSDI signal input to the
HD SDI INPUT connector). Use this
method when synchronizing the timecode
generators of multiple recorders, when
recording the playback timecode of an
external VCR, or when you want to record
without interfering with the timecode
relation of a source image.
Menu item Setting
Mode
Preset
Run
Free Run
1)
or Rec
Run
2)
00:00
Mode
R
u
n
Setting
Reset
: Preset
: Rec R
u
n
: 00:00:00:00
TC/UB SET
Timecode
Users Bit
TC For mat : DF
B
B
00:00
Setting : 20:07:12:0
8
TC/UB SET
Timecode
Users Bit
TC For mat DF
B
B
:
Note
Summary of Contents for XDCAM EX PMW-EX30
Page 111: ......
