Sony XCGH280CR Technical Manual Download Page 21 | Manualshive

Page: 21 / 46

background image

F

unc

tions

21

Line Inverter

You can inverse the signal to be output to GPO.
Setting parameter: LineInverter[LineSelector] = True/

False

Line Sources

The signals mentioned below can be selected for the
output from the GPO ports.
If the line inverter is set to “False,” all signals are High
Active.

Trigger Through output

The signal supplied to the trigger input connector
selected with “TriggerSource” is output as-is.
Setting parameter: LineSource[LineSelector] =

TriggerSignalThroughOut

Exposure output

For outputting the exposure time of the image sensor.
Setting parameter: LineSource[LineSelector] =

ExposureActive

Sensor ReadOut output

For outputting the status of reading from the image
sensor.
Setting parameter: LineSource[LineSelector] =

SensorReadOutActive

Strobe control outputs

For fine adjustment of strobe control for external devices
connected to the camera by controlling the timing and
width of signal generation.
The strobe delay and width can be set each for the GPO1
and GPO2 ports.
Setting parameters: LineSource[LineSelector] =

StrobeActive

StrobeActiveTime[LineSelector] =

1 to 4000 (us)

StrobeActiveDelay[LineSelector] =

0 to 4000 (us)

Note

When using strobe control output, if the strobe delay or
strobe width exceeds the exposure interval, proper
strobe signals cannot be output. Set the strobe control
output so that the delay and width are within the
exposure time.

User outputs

For outputting the user-specified True/False setting.
The camera provides two user output settings (User
Output 1 and User Output 2) which can be selected each
for GPO1 and GPO2 port.
Setting parameters: LineSource[LineSelector] =

UserOutput1/UserOutput2

UserOutputSelector =

UserOutput1/UserOutput2

UserOutputValue[UserOutputSelec

tor] = True/False

True/False

For outputting the True/False setting.
Settting parameter: LineSource = True/False

Line Status

“True” is returned if the input to the selected GPI port is
High, and “False” is returned if it is Low.
Observation parameter: LineStatus[LineSelector] =

True/False

Aegis Electronic Group

www.aegiselect.com

For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * [email protected] * http://www.aegis-elec.com

«
...
19
20
21
22
23
...
»

Summary of Contents for XCGH280CR















































Reviews:

No comments

Related manuals for XCGH280CR

Brand: Unipar Pages: 10

Brand: IFM Pages: 18

Brand: Wirepath Surveillance Pages: 2

WDEM-7680LPDN-IO

Brand: Okina Pages: 36

Brand: Basalte Pages: 2

Brand: Denver Pages: 12

Brand: Velleman Pages: 55

Brand: LST Pages: 1

Brand: Gator Pages: 2

Brand: BUCKINGHAM MFG Pages: 2

Brand: Argo Pages: 7

Brand: V-Tec Pages: 20

Brand: NAPCO Pages: 28

Brand: HIKVISION Pages: 23

Brand: fadini Pages: 2

Brand: Hanwha Vision Pages: 22

Brand: Videotec Pages: 112

Brand: Speco Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands