15
D:\_SONY TV\SY160241_KS BR6 RG\DATA\4690453E11\4690453E11\030ADD.fm
masterpage: Right
XBR-75X905E / 65X905E / 55X905E
4-690-453-
E1
(1)
2
Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
To detach the Table-Top Stand from the TV, remove the screws
.
Note
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV with the LCD
panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes
on the rear of the TV.
Detaching the Table-Top Stand from the TV
Wall-Mount Bracket
(not supplied)
Screw (not supplied)
