Wireless Stereo Headset
WI-C200 / WI-C310
Listening to music from a device via Bluetooth connection
If your Bluetooth device supports the following profiles, you can enjoy listening to music and perform basic remote
control operation of the Bluetooth device via a Bluetooth connection.
A2DP
(
Advanced Audio Distribution Profile
)
You can enjoy high-quality music wirelessly.
AVRCP
(
Audio Video Remote Control Profile
)
You can adjust the volume, etc.
The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the
Bluetooth device.
Hint
The headset supports SCMS-T content protection. You can enjoy music and other audio on the headset from a device such as a
mobile phone or portable TV that supports SCMS-T content protection.
Depending on the Bluetooth device, it may be necessary to adjust the volume or set the audio output setting on the Bluetooth
device.
The headset volume during a call and during music playback can be independently adjusted. Changing the call volume does not
change the volume of music playback and vice versa.
Connect the headset to a Bluetooth device.
1
Wear the headset.
Put the headset with the
(left) mark on your left ear and the
(right) mark on your right ear. The
(left) unit
has a tactile dot.
A:
Tactile dot
Adjust the headset position to fit your ears.
2
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
Adjust the volume by pressing the +/- buttons of the headset.
When the volume reaches the maximum or minimum, an alarm sounds.
4
66