8
Installation
Sony KV-DA34M80 Group E2 (GB Dummy)_2-318-485-E1 (2)
The selected channel will appear on
the screen.
2) Press
2
+/– to select the new
program number position for your
selected channel, then press
t
.
3) Repeat steps b) 1) and 2) if you wish
to change the order of the other
channels.
c) Press MENU to go to the next menu.
4
Press
2
+/– to adjust the bars on the top
and bottom of the menu if they are
slanted, then press
t
.
“Picture V-Position” menu appears.
5
If the upper and lower bars are not
equally positioned to the top and
bottom of the screen, press
2
+/– to
adjust them, then press
t
.
If no adjustment is necessary, then press
t
.
6
Press
2
+/– to select “No”, then press
t
.
This menu will not appear again the next
time you turn on the TV by pressing
!
.
To allow this menu to appear again, select
“Yes”, then press
t
.
Tips
• You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.
• You can also set up your TV by using the menu system (see page 16).
• You can also preset the channels automatically by pressing the MENU (AUTO PROG) button
on the TV front panel for about five seconds.
Notes
• Before adjusting “Picture Rotation” and Picture V-Position”, keep external speakers or other
electrical equipment away from the TV. The magnetic disturbance from these equipments or
the direction of the earth’s magnetic field may affect the TV.
• You cannot adjust “Picture Rotation” and “Picture V-Position” when high-definition (1080i,
720p) signals are input.
01
Program Sorting
Program:
01
02
03
04
Select new position
continued
Picture V-Position
