Sony WEGA KLV-15SR2, Quick Start Manual

Page: 53 / 248

51
Additional Information
GB
Connecting a VCR
To connect a VCR, refer to “Connecting an Aerial and a VCR” on page 26. We recommend you connect
your VCR using a Scart lead. If you do not have a Scart lead, tune in the VCR test signal to the TV
programme number “0” by using the “Manual Programme Preset” option. For details on how to manually
programme these presets, see page 42, step A.
Refer to the instruction manual of your VCR to find out how to find the output channel of your VCR.
Connecting a VCR or a DVD recorder that supports SmartLink
If you use a VCR or a DVD recorder that supports SmartLink, please connect the VCR or the DVD
recorder using a Scart lead to the Scart connector
1/ (
F
).
Connecting a decoder
If you have connected a decoder to the Scart connector
1/ (
F
)
, or through a
VCR connected to this Scart
Select the “Manual Programme Preset” option in the “Set Up” menu and, after entering the “Decoder”*
option, select “On” (using
or ). Repeat this option for each scrambled signal.
Connecting external audio equipment
To listen to the sound from the TV on Hi-Fi equipment
Connect your Hi-Fi equipment to the audio output jacks (
G
) if you want to amplify the audio output
from the TV. Next, using the menu system, select the “Features” menu and set “Speaker” to “Off” (see
page 39).
SmartLink is a direct link between the TV and a VCR or a DVD recorder. For more information on
SmartLink, refer to the instruction manual of your VCR or DVD recorder.
Depending on the country/region you have selected in the “Country” option, this option may not be
available (see page 40).