KDE-37XS955/42XS955 (UC) 2-5
Video
Problem
Possible Remedies
No picture (screen not lit), no
sound
s
If your TV does not turn on, and a red light keeps flashing, your TV may need
service. Call your local Sony Service Center.
s
Make sure the power cord is plugged in.
s
Press the
POWER
button on the right side of the TV.
s
Press the
TV/VIDEO
button to cycle through the connected video sources.
s
Try another channel; it could be station trouble.
Dark, poor or no picture (screen
lit), good sound
s
Adjust the
Picture
option in the Video Menu (see page 92).
s
Adjust the
Brightness
option in the Video Menu (see page 92).
s
Check the antenna/cable connections.
No color./Dark picture./
Color is not correct.
s
Press the
PICTURE (MODE)
button to select the desired Picture mode
(see page 56).
s
Adjust the
Color
option in the Video Menu (see page 92).
Only snow and noise appear on
the screen
s
Check the antenna/cable connections.
s
Try another channel; it could be station trouble.
s
Press
ANT
to change the input mode (see page 57).
Dotted lines or stripes
s
Adjust the antenna.
s
Move the TV away from noise sources such as cars, neon signs, or hair-dryers.
Double images or ghosts
s
Using a highly directional outdoor antenna or a cable may solve the problem.
Striped noise during
playback/recording of a VCR
s
Video head interference. Keep your VCR away from the TV.
s
Leave a space of 30 cm (11 7/8 inches) between your VCR and the TV to avoid
noise.
s
Avoid installing your VCR in front of the TV or at the side of the TV.
Image left on screen
s
Perform image retention recovery. (see page 98)
s
Use the
Screen Saver
function (see page 98).
The screen flickers when
turning on the TV.
s
This is caused by feature of the Plasma Display Panel, and does not indicate a
malfunction of the TV.
ìBl ack boxî on screen
s
You have selected a text option in the Setup Menu and no text is available. (See
page 104 to reset Setup selections.) To turn off this feature, set the
Caption Vision
option to
Off
. If you were trying to select closed captioning, select
CC1
instead of
TEXT 1-4
.
Bars appear at the top and
bottom of the screen
s
Some wide-screen programs are filmed in aspect ratios that are greater than 16:9,
such as 2.35:1. (This is especially common with theatrical releases). Your TV will
show these programs with bars at the top and bottom of the screen. For more
details, check the documentation that came with your DVD (or contact your
program provider).
Certain programs on DVD or
other digital sources display a
loss of detail, especially during
fast-motion or dark scenes
s
The compression used by certain digital broadcasts and DVDs may cause your
TVís screen to display less detail than usual, or cause artifacts (small blocks or
dots, pixelations) to appear on your screen. This is due to your TVís large screen
and ability to show very fine detail, and is normal for certain digitally recorded
programs. Adjust the reality/clarity in the
DRC Palette
option (see page 93) to
optimize the picture while viewing these sources.
