Sony WALKMAN WM-GX822, Operating Instructions Manual

Page: 50 / 58

|
50
* The Walkman fast forwards the
tape to the next track if there is a
blank space longer than 12 seconds.
Note
To detect a blank space easier when
the AMS or BL SKIP does not
operate, press MENU repeatedly to
set the cursor to AMS in the display
and then press SET to show “LOW”.
The AMS and BL SKIP will change
sensitivity to detect the blank space
easier. To return to the normal
settings, press SET to clear “LOW”.
To select playback mode
Press MENU repeatedly to set the
cursor to DIR in the display. Press
SET to select the desired function.
To play Set the
selector to
Both sides
a
repeatedly
Both sides once
Å
from the side
facing the tape
holder
To play a tape recorded
with the Dolby* B NR
system
Press MENU repeatedly to set the
cursor to
a NR (Dolby noise
reduction) in the display. Press
SET to show “ON”.
To Press
Play the other side œ •REPEAT
(during playback)
Stop playback
p
(stop)
Fast forward FF•AMS
(in the stop mode)
Rewind REW•AMS
(in the stop mode)
Repeat the œ •REPEAT
current track (2 seconds or
(Repeat Single more during
Track function) playback)
to stop a single
repeat, press it
again.
Find the beginning FF•AMS (shortly/
of the next track/
repeatedly during
succeeding playback)
3 tracks
(AMS*function)
Find the beginning REW•AMS
or the current
(shortly/
track/previous repeatedly during
2 tracks playback)
(AMS function)
Play the other side FF•AMS
from the beginning (2 seconds or
(Skip Reverse
more during stop)
function)
Play the same side REW•AMS
from the beginning (2 seconds or
(Auto Rewind
more during stop)
Play function)
*Automatic Music Sensor
To skip a long blank space
between tracks (BL SKIP*
function)
Press MENU repeatedly to set the
cursor to BL SKIP in the display.
Press SET to show “ON”.