Sony VSPA-D7, Setup Instructions, Page: 16 / 21

16
Settings Required After Installation
If checking connection to the display device fails
If checking of the connection to the display device fails in
step
3
in the procedure above, the “Port No.” text box will
appear in the “Display Settings” window with a message,
as follows:
The number shown in the “Port No.” text box is the port
number used by the player when it tries to communicate
with the display device.
If a different port number used for communication is
specified on the display device, enter that number in the
‘Port No.” text box and retry checking the connection.
If this is not the case, check the IP address specified on the
display device.
Sending the Settings to the Players
After making the settings related to the players, send the
settings to the players.
1
In the “VSP-NS7 Setup” window, select the players
for which “Unsent” is shown in the “Sending Status”
column, then click [Send Settings].
To select more than one player, hold down the “Ctrl”
key and click the desired players in turn.
To select all the players in a range, hold down the
“Shift” key and click the first and last players in the
range.
The “VSP-NS7 Operation Time” and “VSP-NS7 Time
Adjustment” settings in the “System Setup” window,
the name and resolution of the player in the “VSP-NS7
Basic Settings” window, and all the settings in the
“Detailed Settings” window are sent to each player.
A message appears after the data is sent, and the status
of data sending is shown on the list.
Each player restarts automatically when it receives the
settings.
2
After sending the settings to the players, click [Close]
in the “VSP-NS7 Setup” window.
The “VSP-NS7 Setup” window closes.