7
VPL-VW100
3-2. PJ Talk
The remote control service is provided that can control the projector from remote location via network.
3-2-1. Function
This responds to the control command and requests for acquiring the status and information supplied
from clients.
Control request
Enables the input to be selected and picture control to be adjusted.
SIRCS request
Enables remote control by sending the SIRCS code.
Status request
Enables equipment status information such as power status, error information and power-on time to be
acquired.
Information request
Enables equipment information such as equipment name, serial number and installation information to be
acquired.
Protocol
Item
Description
Protocol name
SDCP (Simple Display Control Protocol)
Transport
TCP
Port number
53484 (Factory-shipments value)
TCP connection timeout
30 seconds (Factory-shipments value)
3-2-2. Setup Items
The items that can be set for the PJ Talk service are described below.
Setup item
Description
Port No.
Port number
Timeout
TCP connection timeout time
Host Address
IP address of connectable PC
