Sony VPL-X600E Operating Instructions Manual Download

Page: 8 / 45

(EN)

Location and Function of Controls

Front

Front cover

Installs the Remote Commander in the back of the
front cover.

Front adjuster button

Lens

Remove the front cover and the lens cap before
projection.

Focus ring

Adjusts the picture focus.

Ventilation holes (bottom / intake)

Zoom ring

Adjusts the size of the picture.

Front adjuster

Used to keep the projector level if it is installed on an
uneven surface.

For details on how to use the adjusters, see “How to use the
adjusters” on page 10 (EN).

Front remote control detector

Ventilation holes (exhaust)

Notes

• Do not place anything near the ventilation holes as it

may cause internal heat build-up.

• Do not place your hand or objects near the ventilation

holes — the air coming out is hot.

!º

Lamp cover (bottom)

!¡

Carrying handle

Used for carrying the projector.

!™

Security lock

Connects to an optional security cable (Kensington’s).

!£

!¢

!∞

!¡

!™

The security lock corresponds to Kensington’s
MicroSaver Security System.
If you have any comment, contact

Kensington
2853 Campus Drive, San Mates, CA 94403
U.S.A.
Tel: 800-535-4242: extension 3348
Home page address: http://www.kensington.com/

Summary of Contents for VPL-X600E














































Search results

Summary of Contents for VPL-X600E

Reviews:

Related manuals for VPL-X600E

Brands by name

Popular brands

Sony VPL-X600E, Operating Instructions Manual

Search results

Summary of Contents for VPL-X600E

Reviews:

Related manuals for VPL-X600E

Brands by name

Popular brands