Sony VPL-VW570ES Operating Instructions Manual Download

Page: 34 / 74

Network Management

On:

Set when connected to the network and continuously

communicating with the projector control equipment.

When Network Management is set to “On,” the network function is
continuously enabled. Set Network Management to “Off” when the unit
is not continuously connected to the network. If you set to “On,” the
power consumption increases.

Power Saving

Sets the power saving mode.

Standby:

If no signal is input for 10 minutes, power is turned off

automatically and the projector goes into standby mode.

Off:

Disables the power saving function.

Lamp Setting

When replacing the lamps, set the desired lamp setting
(page 51).

All Reset

All settings are initialized to their factory preset values.

The “Lamp Timer” in the Information

menu is not reset.

Setting items

Description

Note

Summary of Contents for VPL-VW570ES











































































Search results

Summary of Contents for VPL-VW570ES

Reviews:

Related manuals for VPL-VW570ES

Brands by name

Popular brands

Sony VPL-VW570ES, Operating Instructions Manual

Search results

Summary of Contents for VPL-VW570ES

Reviews:

Related manuals for VPL-VW570ES

Brands by name

Popular brands