Sony VPL-FX30, Operating Instructions Manual

Page: 6 / 49

6
Location and Function of Controls
e
Using various functions during
projecting
D ZOOM (Digital Zoom) +/– key
*1
Enlarges a portion of the image while
projecting.
1 Press the D ZOOM + key to display
the digital zoom icon on the projected
image.
2 Press the
V
/
v
/
B
/
b
keys to move the
digital zoom icon to the point on the
image you wish to enlarge.
3 Press the D ZOOM + key or the D
ZOOM – key repeatedly to change the
enlargement ratio. The image can be
enlarged up to 4 times.
Press the RESET key to restore the
previous image.
MUTING key
PIC: Cuts off the image. Press again to
restore the image.
AUDIO: Mutes the audio output. Press
again to restore the previous volume.
/– key
For adjusting the volume output from
the audio output connector of the
projector.
TWIN (double-window) key
This function is not provided in this
projector.
FREEZE key
*2
Pauses a projected image. Press again to
restore the image.
*1: Use this key when inputting a
computer signal. But it may not be
used depending on the resolution of
the input signal.
*2: Use this key when inputting a
computer signal.
f
Setting the energy–saving mode
easily
ECO MODE key
“Lamp Mode,” “Power Saving Mode,”
and “Standby Mode” for energy-saving
can be set easily.
1
Press the ECO MODE key to display
the ECO Mode menu.
2 Press the
V
/
v
key or ECO MODE key
to select ECO or User mode.
ECO: Sets each mode to the optimum
energy-saving value.
Lamp Mode: Standard
Power Saving Mode: Standby
Standby Mode: Low
(go to step
6 )
User: Sets each item of the energy-
saving mode menu as you desire
(go to step
3 ).
3 Select “User” then press the
b
key.
The setting items appear.
4
Press the
V
/
v
key to select the ECO
Mode item then press the b key or the
ENTER key.
5
Press the
V
/
v
key to select the setting
value.
6
Press the RETURN key to restore the
previous image.
For details on ECO Mode settings, see
“Lamp Mode” (page 19) on the Function
menu and “Standby Mode” (page 21)
and “Power Saving Mode” (page 21) on
the Connection/Power menu.
Others
g
Infrared transmitter
h
ID MODE 1/2/3 switch (page 20)
Sets an ID mode of the Remote
Commander. If you assign a different ID
number to each projector when multiple
projectors are used, you can control only
the projector with the same ID mode as
that of the Remote Commander.
Notes
ECO
User
Sel Back
ECO Mode
ECO Mode Menu
Lamp Mode Standard
Power Saving Mode Off
Standby Mode Standard
Sel Back
User
Set