GB
36
Connecting
Turn off all devices before making any connections.
Use the proper cables for each connection.
Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a
malfunction. When unplugging a cable, be sure to grip the plug, not the cable itself.
For more information, refer also to the instruction manual of the device to be connected.
Use a no-resistance audio cable.
Connect the INPUT C terminal to a computer’s HDMI output terminal.
Use an HDMI compatible device with the HDMI Logo.
Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.)
The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) signal or CEC (Consumer Electronics
Control) signal.
Connecting
Notes
Connecting to a Computer
Notes
Step 2
HDMI cable (not supplied)
