6
Remote Commander and Control Panel
Remote Commander
Control Panel
Infrared transmitter
(On) key/
(Standby) key
Turns on the projector or enters the standby
mode.
INPUT key
Selecting an input signal (page 16).
TWIN (Twin Picture) key
You can project the images from two input
signals on the screen as a main picture and
subpicture at the same time (page 22).
PICTURE MODE key
Changes the picture quality mode.
When “Intelligent Setting” in the Projection Setting
menu is set to “On,” “Picture Mode” cannot be set
(page 24).
MENU key/ENTER key/
/
/
/
(arrow)
keys/RETURN key/RESET key
Operating a menu (page 23).
FOCUS key
Use this key when attaching the electric focus
lens (page 17).
ZOOM key
Use this key when attaching the electric zoom
lens (page 17).
LENS SHIFT/SHIFT key/PATTERN key/
KEYSTONE key
Use this key when adjusting the projected
image (page 17).
POSITION (Picture Position) key
You can store up to six combinations of lens
settings (focus, picture size (Zoom), picture
position (Lens shift)) (page 21).
ASPECT key
Changes the aspect ratio of the projected
image (page 28).
APA (Auto Pixel Alignment) key
Automatically adjusts a picture to its clearest
while a signal from a computer is input via the
RGB input terminal (INPUT A, INPUT B). You
can cancel the adjustment by pressing the
APA key again while adjusting.
D ZOOM (Digital Zoom) key
Enlarges a part of the image while projecting
(page 22).
FREEZE key
Pauses a projected image. Press again to
restore the image. Use this key when inputting
a computer signal.
Note
Summary of Contents for VPL-FHZ101
Page 64: ...Sony Corporation ...
