16
Projecting an Image
The size of a projected image depends on the
attached lens or the distance between the
projector and screen. Place the projector so that
the projected image fits the screen size. For details
on projection distances and projected image sizes,
see “Projection Distance and Lens Shift Range”
(page 58).
1
Plug the AC power cord into a wall outlet.
2
Connect all necessary devices to the projector
(page 8).
3
Turn on the projector.
Press the
/
key on the main unit or the
key
on the Remote Commander.
4
Turn on the connected device.
5
Select the input source.
Press the INPUT key on the projector or on the
Remote Commander to display the input
select window. Press the INPUT key repeatedly
or the
/
key to select an image to be
projected. The signal icon
appears on the
right side in the input select window when a
signal is input.
*1
Also, you can select an input signal on the
Remote Commander.
*1: When INPUT F is input with the compatible
optional adaptor attached, the signal icon
always appears.
6
Change the computer screen output
destination to an external display.
How to change the output destination varies
depending on the type of computer.
(Example)
7
Adjust the projected image (page 17).
1
Press the
/
key on the main unit or the
key on the Remote Commander.
The shutdown process is started and the
projector enters the standby mode.
For long-term use, turn off the projector when
not in use.
2
Unplug the AC power cord from the wall
outlet.
Projecting/Adjusting an Image
Turning Off the Power
Summary of Contents for VPL-FHZ101
Page 64: ...Sony Corporation ...
