Sony VPL-F401H, Service Manual

Page: 61 / 176

2-11 (E)
VPL-FH31/F401H
2-7. Quick Access2
2-7-1. Preparation
Required equipment/Tools
.
Personal computer (PC): RS-232C interface equipped
.
RS-232C cross cable
.
QuickAccess2: Executable: QuickAccess2.exe
Preparation
1. Install the QuickAccess2 in PC.
2. Connect this unit with PC. (Refer to RS-232C connection in Section 2-7-1.)
2-7-2. Saving of C Board/Opt Unit/3DGamma/LookUpTable/Chiral/GCFB Data
1. Connect the power cord and set this unit to standby state.
2. Press the I/O button on this unit.
The lamp lights and the image is displayed.
3. Double-click QuickAccess2.exe to start the application.
4. Select a target model on the Model pull-down menu.
5. Select Save on the Load/Save pull-down menu.
6 Select the data type (C Board/Opt Unit/3DGamma/LookUpTable/Chiral/GCFB) on the Data Type
pull-down menu.
7. Click the
[Next]
button.
8 Click the
[Browse...]
button.
The fi le selection window is displayed.
9. Select the destination fi le for the obtained data.
10. Click the
[Next]
button.
11. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400
12. Click the
[Next]
button.
The window displaying the model name of this unit, serial number, and the fi le path of the destination
of the obtained data to save is displayed.
13. Click the
[OK]
button.
The saving starts. Completed is displayed after completed.
14. Press the I/O button and set this unit to standby state.
15. Disconnect the power cord.
16. Click the
[Complete]
button.