13
GB
Troubleshooting
Indicators
The image extends beyond
the screen.
The APA key has been pressed even though there are black edges
around the image.
c
Display the full image on the screen and press the APA key.
c
Adjust “Shift” on the INPUT SETTING menu properly.
The picture flickers.
“Dot Phase” on the INPUT SETTING menu has not been adjusted
properly.
c
Adjust “Dot Phase” on the INPUT SETTING menu properly.
Indicators
Status and Remedy
POWER SAVING
Lights up when the projector is in power saving mode.
TEMP/FAN
Lights up when temperature inside the projector becomes unusually
high. Check to see if anything is blocking the ventilation holes.
Flashes when the fan is broken. Consult with qualified Sony
personnel.
LAMP/COVER
Lights up when the lamp has reached the end of its life or becomes a
high temperature. Wait to cool down the lamp and turn on the power
again, or replace the lamp.
If it lights after you replaced the lamp, the electrical system may
have broken down. Consult with the qualified Sony personnel.
Flashes when the lamp cover or the air filter cover is not secured
firmly. Attach the cover securely.
I
/
1
indicator
Lights in red in standby mode. You can turn on the projector with
the
I
/
1
key.
Lights in green when the power is turned on.
Flashes in green from the projector is turned on until the projector is
ready to operate. Also, flashes in green while the cooling fan runs
after the power is turned off with the
I
/
1
key. During this time, you
will not be able to turn on the projector.
Symptom
Cause and Remedy
