Sony VPL-CWZ10 Help Manual Download Page 27

Page: 27 / 184

Data Projector

VPL-CWZ10/CXZ10

Selecting the Menu Language

The factory setting for the language for displaying menus, messages, etc. is English. To change the on-screen language,
proceed as follows:

Related Topic

Menu Operation: Language

Press the MENU key to display the menu screen.

If the display cannot be properly seen, adjust the focus, size, and position of the projected image.

Select the menu language.

Press the

(Up) or

(Down) key to select

[Operation] (Operation), then press the ENTER key.

Press the

(Up) or

(Down) key to select

[Language] (Language), then press the ENTER key.

Press the

(Up/Down/Left/Right) key to select a language, then press the ENTER key.

Press the MENU key to turn off the menu screen.

Summary of Contents for VPL-CWZ10

















































































































































































Search results

Summary of Contents for VPL-CWZ10

Reviews:

Related manuals for VPL-CWZ10

Brands by name

Popular brands

Sony VPL-CWZ10, Help Manual

Search results

Summary of Contents for VPL-CWZ10

Reviews:

Related manuals for VPL-CWZ10

Brands by name

Popular brands