24
The Function Menu
The Function Menu
The Function menu is used for changing the settings of the projector.
Setting items
Functions
Initial setting
Smart APA
The APA (Auto Pixel Alignment) automatically
adjusts “Dot Phase,” “H Size” and “Shift” on the
Signal menu for the input signal from a computer.
•
On:
When a signal is input from a computer, the
APA functions automatically so that the picture can
be seen clearly. Once the specified input signal has
been adjusted by the “Smart APA,” it will not be
readjusted even when the cable is disconnected and
connected again or the input channel is changed. You
can adjust the picture by pressing the APA key on the
Remote Commander even if “Smart APA” set to
“On.”
•
Off:
The APA functions when you press the APA key
on the Remote Commander.
On
Auto Input Search
When set to “On,” the projector detects input signals in
the following order: Input-A/Video/S-Video. It
indicates the input channel when the INPUT key is
pressed.
Off
Auto Focus
When set to “Off,” the focus adjustment does not work
automatically when the projector is turned on or when
the AUTO FOCUS key on the projector or the remote
commander is pressed.
On
Test Pattern
When set to “On,” a test pattern is displayed on the
screen during “Lens Zoom”, “Lens Focus,” or “V
Keystone” adjustment.
Off
Standby Mode
When set to “Low”, the power consumption is set to
low in standby mode.
Standard
Power Saving
When set to “On,” the projector goes into power saving
mode if no signal is input for 10 minutes. Although the
lamp goes out, the cooling fan keeps running. The
power saving mode is canceled when a signal is input
or any key is pressed. In power saving mode, no keys
function for the first 45 seconds after the lamp goes
out.
Off
