Sony VPH-G90E, Installation Manual

Page: 29 / 480

Connections
29
(GB)
Connections
TRIGGER LINK
S VIDEO
OUT IN
C IN Y IN
VIDEO
VIDEO
R-Y/P
R
R
B-Y/P
B
G B SYNC/HD VD
INPUT A
Y
CONTROL S
PLUG IN POWER
DEVICE INDEX
IN OUT
IN OUT
IN OUT
REMOTE
RS-232C/422A
RS-232C RS-422A
IN OUT PJ COM
This is an example to connect pieces of video equipment directly to a
single projector.
Use the IFU-1271/1271M Signal Interface Unit.
Setting up
• Set INPUT A in the SET SETTING 1 menu
(page 62
(GB)
)
to RGB.
• Select VIDEO or S VIDEO by pressing the INPUT SELECT keys on the
remote commander.
• Switch the 75-ohm terminate connectors on the BA board according to
the connections of the computer and color monitor.
For details, see “Switching the 75-ohm Terminate Connectors” on page 27
(GB)
.
Connecting Directly to the Projector
Color
monitor
to video input
Rear
AC power cord (supplied)
to a wall outlet
Video equipment
to video output
to S video output
IFU-1271/1271M
Signal Interface Unit
IFB-12/12A
signal interface
board, etc.
to RGB input
to RGB output
Computer
to RGB output
to RGB input
Color
monitor
Signal flow
R G
B
SYNC/HD
VD
VIDEO
OUT
AC IN
VIDEO IN S VIDEO
IN INPUT A
*
*
For the VPH-G90E model:
IFB-G90E Video Interface Board (optional).