background image

65

n

N

Using Your VAIO Computer >
Using Other Modules / Memory Cards

Notes on Using Memory Cards

General notes on using the memory card

Be sure to use memory cards that are compliant with the standards supported by your computer.

Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid 
damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly.

Use care when inserting or removing the memory card from the slot. Do not force it in or out of the slot.

Do not remove the memory card while the media access indicator light is lit. If you do, you may lose data.

Do not attempt to insert a memory card or memory card adaptor of a different type into the memory card slot. An 
incompatible memory card or memory card adaptor may cause difficulty in removing from the slot and can cause damage 
to your computer.

Do not insert more than one memory card into the slot. Improper insertion of the media may damage both your computer 
and the media.

Notes on using the SD memory card

Your computer has been tested and found compatible only with major memory cards available as of October 2011. 
However, not all memory cards are guaranteed of compatibility.

SD memory cards (up to 2 GB), SDHC memory cards (up to 32 GB), and SDXC memory cards (up to 64 GB) have been 
tested and found compatible with your computer.

Some types of SD memory cards, for example ones with the UHS (Ultra High Speed data transfer feature), may become 
extremely hot due to continuous access to the memory cards. In such a case, wait for a while before removing the memory 
card until it cools down.

  

Summary of Contents for VPCSA4A4E
















































































































































































































Reviews: