Using Peripheral Devices >
Connecting a Port Replicator
Attaching Your Computer to the Port Replicator
!
Be sure to install the battery pack(s) before attaching your computer to the port replicator.
To attach your computer to the port replicator
!
If the AC adapter is supplied with your port replicator, be sure to use it to connect the port replicator to a power source. If not, use the AC adapter
supplied with your computer.
To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator.
Do not move your computer when it is attached to the port replicator. This may detach the port replicator and cause damage to both units.
The monitor port, the
HDMI
output port, and the LAN port on your computer is not accessible when the computer is attached to the port replicator. Use
the
MONITOR
port, the
HDMI
output port, or the LAN port on the port replicator for connection.
1
Shut down the computer, close the LCD screen lid, and disconnect all peripheral devices and the AC adapter.
2
Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.
3
Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the port replicator.
