Precautions >
Handling the Built-in Storage Device
Handling the Built-in Storage Device
The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short
time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be
restored. To prevent losing data, you should be careful when handling your computer.
Some features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
To avoid damaging your built-in storage device
❑
Do not subject your computer to sudden movements.
❑
Keep your computer away from magnets.
❑
Do not place your computer in a location subject to mechanical vibration or in an unstable position.
❑
Do not turn off the power or restart your computer while reading or writing data to the storage device.
❑
Do not use your computer in a place subject to extreme changes in temperature.
❑
Do not remove the storage device from your computer.
