Troubleshooting
What should I do if I cannot play a disc properly on my computer?
❑
Make sure the disc is inserted into the optical disc drive with the label facing upward.
❑
Make sure the necessary program(s) is installed according to the manufacturer's instructions.
❑
If a disc is dirty or damaged, your computer will stop responding. Follow these steps:
1
Press the
Ctrl
+
Alt
+
Delete
keys and click the arrow next to the
Shut down
button and
Restart
to restart the computer.
2
Remove the disc from the optical disc drive.
3
Check the disc for dirt or damage. If you need to clean the disc, see
On Handling Discs
for instructions.
❑
If you are playing a disc and cannot hear sound, do any of the following:
❑
Check if the volume is turned off or minimized by the muting or volume button, respectively, on the remote
commander.
❑
Right-click the volume
icon on the taskbar and click
Open Volume Mixer
to check the settings.
❑
Check the volume setting in the audio mixer.
❑
If you are using external speakers, check the volume settings on the speakers and the connections between the
speakers and your computer.
❑
Make sure the correct driver software is installed. Follow these steps:
1
Click
Start
and
Control Panel
.
2
Click
System and Maintenance
.
3
Click
System
.
4
Click
Device Manager
on the left pane.
The
Device Manager
window appears with a listing of your computer's hardware devices.
If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the
drivers.
Summary of Contents for VGX-TP2S/B
