Sony VGP-MR100U - Room Link 2, Quick Start Manual

Page: 29 / 143

VGP-MR100QSG(GB)_2-580-488- 11 (1)
29
5
Use the V / v buttons to select “System Settings” , and press the
SELECT button.
The “System Settings” screen appears.
System Settings
TV Type
Network Settings
Playback Preference
Firmware Update
Default Settings
System Information
Language Settings
SELECT :Select RETURN :Return
6
Use the V / v buttons to select “Network Settings”, and press the
SELECT button.
The “Network Settings” screen appears.
7
Change the IP address allocation method and specify the IP address if
necessary.
1 Use the V / v buttons to select “IP Address”, and press the SELECT button.
The “IP Address” screen appears.
2
Use the
V
/
v
buttons to select the setting that matches your network
environment, and press the SELECT button.
If the environment includes a router: select “Obtain an IP address
automatically (using router)”.
If the environment does not include a router: select “Obtain an IP address
automatically (not using router)”.
3 If you have selected “Specify an IP address”, use the V / v / B / b buttons to select
“OK”, and press the SELECT button. Then use the number buttons to enter the
IP address and subnet mask, and press the SELECT button.
4 Use the V / v / B / b buttons to select “OK”, and press the SELECT button.
When the message about restarting the Network Media Receiver appears,
select “OK” and press the SELECT button. The Network Media Receiver
restarts and enters Standby mode.
z
Hint
If you have selected “Obtain an IP address automatically”, the assigned IP address will be displayed when
you access the “IP Address” screen after the Network Media Receiver has restarted.