Sony VGN-Z Series Operating Instructions Manual Download Page 29

Page: 29 / 206

Using Your VAIO Computer >
Using the Keyboard

Using the Keyboard

Your keyboard has additional keys that perform model-specific tasks.

Combinations and Functions with the Fn Key

✍

Some keyboard functions can be used only after the operating system is finished launching.

Combinations/Feature

Functions

(F2)

: speaker switch

Turns on and off the built-in speakers and the headphones.

(F3/F4)

: volume

Changes the volume level.
To increase the volume, press the

keys and then the

key, or keep pressing the

keys.

To decrease the volume, press the

keys and then the

key, or keep pressing the

keys.

(F5/F6)

: brightness control

Changes the LCD brightness of your computer screen.
To increase lighting intensity, keep pressing the

keys or press the

keys and then

the

key.

To decrease lighting intensity, keep pressing the

keys or press the

keys and then

the

key.

(F7)

: display output

Toggles among your computer screen, an external display, and simultaneous output to both.

(F9/F10)

: zoom

Changes the size of an image or a document displayed on some software.
To make the view look smaller and further away (zoom out), press the

Fn+F9

keys.

To make the view look bigger and closer (zoom in), press the

Fn+F10

keys.

See the help file included with the

VAIO Control Center

for more information.

Summary of Contents for VGN-Z Series















































































































































































































Search results

Summary of Contents for VGN-Z Series

Reviews:

Brands by name

Popular brands

Sony VGN-Z Series, Operating Instructions Manual

Search results

Summary of Contents for VGN-Z Series

Reviews:

Brands by name

Popular brands