Sony VGN-SZ1HP/B User Manual Download Page 45

Page: 45 / 218

Using Your VAIO Computer

Using PC Cards

PC Cards allow you to connect portable external devices to your computer.

Inserting a PC Card

Some PC Cards or their functions may not be compatible with the computer.

You do not need to shut down the computer before inserting or removing a PC Card.

To insert a PC Card

Push the PC Card release button so that the release button pops out.

Push the PC Card release button a second time so that the PC Card slot protector pops out.

Gently take hold of the protector and pull it out of the slot.

Insert the PC Card into the PC Card slot with the front label facing up.

Gently push the PC Card into the slot.
The PC Card is automatically detected by your system.
The Safely Remove Hardware icon appears on the taskbar.

Summary of Contents for VGN-SZ1HP/B



























































































































































































































Search results

Summary of Contents for VGN-SZ1HP/B

Reviews:

Related manuals for VGN-SZ1HP/B

Brands by name

Popular brands

Sony VGN-SZ1HP/B, User Manual

Search results

Summary of Contents for VGN-SZ1HP/B

Reviews:

Related manuals for VGN-SZ1HP/B

Brands by name

Popular brands