Sony VGN-SZ1HP/B, User Manual

Page: 184 / 218

184 n N
Troubleshooting
Why can't I use the built-in MOTION EYE camera?
❑
The built-in MOTION EYE camera cannot be shared by more than one software application. If another software
application is using the camera, exit the application before using the built-in MOTION EYE camera.
❑
If the problem persists, you must reinstall the driver software for the camera. Proceed as follows to reinstall the driver
software.
1 Click Start and then Control Panel.
2 Click the Performance and Maintenance icon.
3 Click the System icon.
4 Click Device Manager on the Hardware tab.
5 Double-click Imaging devices.
6 Right-click Sony Visual Communication Camera VGP-VCC2 and click Update Driver.
Why does my computer become unstable when I place it into Standby or Hibernate mode
while using the built-in MOTION EYE camera?
❑
Do not place your computer into Standby or Hibernate mode while you are using the built-in MOTION EYE camera.
❑
If your computer automatically enters Standby or Hibernate mode, change the respective power saving mode setting. For
changing the setting, see Using the Power Saving Modes
(page 135) .