Sony VGN-SR3 User Manual Download

Page: 94 / 220

Using Peripheral Devices

Connecting a Projector

You can connect a projector (for example, the Sony LCD projector) either directly to your computer or via the optional docking
station.

To connect a projector

The monitor port on your computer is not accessible when the computer is attached to the docking station.

Connect the power cord (1) of your projector into an AC outlet.

Plug a display cable (2) (not supplied) into the monitor port (3)

on the computer or on the docking station.

Plug an audio cable (4) (not supplied) into the headphones jack (5)

on the computer.

Plug the display cable and the audio cable into the port and jack on the projector (6).

Summary of Contents for VGN-SR3





























































































































































































































Search results

Summary of Contents for VGN-SR3

Reviews:

Related manuals for VGN-SR3

Brands by name

Popular brands

Sony VGN-SR3, User Manual

Search results

Summary of Contents for VGN-SR3

Reviews:

Related manuals for VGN-SR3

Brands by name

Popular brands