background image

35

n

N

Using Your VAIO Computer

Using the Built-in MOTION EYE Camera

Your computer may be equipped with a built-in 

MOTION EYE

 camera. See the online specifications to find out whether your 

model is equipped with the built-in 

MOTION EYE

 camera.

The built-in 

MOTION EYE

 camera adds video functionality to instant messaging software and video editing software and 

enables you to capture still images and movies with the preinstalled image capture software.

Turning on the computer activates the built-in 

MOTION EYE

 camera. Video conference is possible with the appropriate 

software.

Note that launching or exiting your instant messaging or video editing software does not activate or deactivate the built-in 

MOTION EYE

 camera, respectively.

The built-in 

MOTION EYE

 camera cannot be shared by more than one software application. If another software application is using the camera, exit the 

application before using the built-in 

MOTION EYE

 camera with your desired application.

!

The viewer window may show some noise, for example horizontal streaks, if you view a rapid-moving object. This is normal and does not indicate a 
malfunction.

You cannot operate the built-in 

MOTION EYE

 camera with the 

Microsoft Windows Movie Maker

 software.

Summary of Contents for VGN-NS10E/S









































































































































































Reviews: