Sony VGN-FZ21E User Manual Download

Page: 167 / 175

Troubleshooting

How do I output the Dolby Digital or DTS sound through an HDMI-compatible device?

This Q & A entry applies to models with the NVIDIA video controller only.

To output the Dolby Digital or DTS sound from a disc through an HDMI-compatible device connected to your computer, follow
these steps:

Click

Start

and

Control Panel

Click

Hardware and Sound

Click

Manage audio devices

under

Sound

On the

Playback

tab, select the HDMI icon and click

Properties

Click the

Supported Formats

tab.

Click to select the

DTS audio

and

Dolby Digital

check boxes.

Click

If the Dolby Digital or DTS sound is output to a device that does not support it, the device will not play any sound. In such a case, cancel the

DTS audio

and

Dolby Digital

check boxes.

Summary of Contents for VGN-FZ21E
















































































































































































Search results

Summary of Contents for VGN-FZ21E

Reviews:

Related manuals for VGN-FZ21E

Brands by name

Popular brands

Sony VGN-FZ21E, User Manual

Search results

Summary of Contents for VGN-FZ21E

Reviews:

Related manuals for VGN-FZ21E

Brands by name

Popular brands