background image

174

n

N

Troubleshooting

What should I do if a BIOS error appears when I turn on my computer?

If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of the screen, follow these steps:

1

Press the F2 key.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo 
appears.

2

Set the date (month/day/year). Press the Enter key.

3

Press the 

key to select System Time, and then set the time (hour: minute: second). Press the Enter key.

4

Press the 

key to select the Exit tab, and then press the F9 key.

At the confirmation prompt, press the Enter key.

5

Select Exit Setup, and press the Enter key.
At the confirmation prompt, press the Enter key.
Your computer restarts.

If this occurs frequently, contact VAIO-Link.

 

What should I do if the power indicator (Green) lights but my screen stays blank?

Follow these steps:

1

Press and hold the power button for more than four seconds to check that the power indicator goes out. Then turn on your 
computer again.

2

If your computer screen still stays blank, unplug the AC adapter, remove the battery pack, and leave the computer for 
about a minute. Then reinstall the battery pack, plug in the AC adapter, and turn on the computer again.

 

Summary of Contents for VGN-BX41VN































































































































































































































Reviews: