background image

156

n

N

Notice >

Notice

© 2010 Sony Corporation. All rights reserved.

This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any 
machine-readable form without prior written approval.

Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and 
hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this 
manual, the software, or such other information. In no event shall Sony Corporation be liable for any incidental, consequential, 
or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the 
software, or other information contained herein or the use thereof.

In the manual, the ™ or ® marks are not specified.

Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time 
without notice. The software described herein is governed by the terms of a separate user license agreement.

Sony Corporation is not liable and will not compensate for any lost recordings made to your computer, external recording 
media, or recording devices or any relevant losses, including when recordings are not made due to reasons including your 
computer failure, or when the contents of a recording are lost or damaged as a result of your computer failure or repair 
undertaken to your computer. Sony Corporation will not restore, recover, or replicate the recorded contents made to your 
computer, external recording media, or recording devices under any circumstances.

Summary of Contents for VAIO VPCY21 SERIES






























































































































































Reviews: