background image

-2-

VPCEG Series (9-890-871-XX)

Sony Confidential

Information in this document is subject to 
change without notice.

Sony, VAIO and CLIE are trademarks or regis-
tered trademarks of Sony. Microsoft, Windows, 
Windows Media, Outlook, Bookshelf and other 
Microsoft products are trademarks or registered 
trademarks of Microsoft Corporation in the 
United States and other countries. The word 
Bluetooth and the Bluetooth logo are trademarks 
of Bluetooth SIG, Inc. AMD, the AMD logo, other 
AMD product names and combinations thereof 
are trademarks of Advanced Micro Devices, Inc. 
Intel Inside logo, Pentium,  Celeron and Core are 
trademarks or registered trademarks of Intel Cor-
poration. Transmeta, the Transmeta logo, Crusoe 
Processor, the Crusoe logo and combinations 
thereof are trademarks of  Transmeta Corporation 
in the USA and other countries. Graffiti, Hot-
Sync, PalmModem, and Palm OS are registered 
trademarks, and the Hotsync logo and Palm are 
trademarks of Palm, Inc. or its subsidiaries. (M) 
and Motrola are trademarks of Motrora, Inc. Other 
Motrola products and services with (R) mark like 
Dragonball are the trademarks of Motrola, Inc.

All other names of systems, products and services 
in this manual are trademarks or registered trade-
marks of their respective owners. In this manual, 
the (TM) or (R) mark are not specified.

Caution Markings for Lithium/Ion Battery - The 
following or similar texts shall be provided on 
battery pack of equipment or in both the operating 
and the service instructions.

CAUTION: Danger of explosion if battery is 
incorrectly replaced. Replace only with the same 
or equivalent type recommended by the manu-
facturer. Discard used batteries according to the 
manufacturer’s instructions.

CAUTION: The battery pack used in this device 
may present a fire or chemical burn hazard if mis-
treated.  Do not disassemble, heat above 60°C 
(140°F) or incinerate. Dispose of used battery 
promptly. Keep away from children.

CAUTION: Changing the back up battery.

Overcharging, short circuiting, reverse charg-
ing, multilation or incineration of the cells must 
be avoided to prevent one or more of the fol-
lowing occurrences; release of toxic materials, 
release of hydrogen and/or oxygen gas, rise in 
surface temperature.
If a cell has leaked or vented, it should be 
replaced immediately while avoiding to touch 
it without any protection.

Service and Inspection Precautions

1. Obey precautionary markings and 

instructions

Labels and stamps on the cabinet, chassis, and 
components identify areas requiring special pre-
cautions.  Be sure to observe these precautions, 
as well as all precautions listed in the operating 
manual and other associated documents.

2. Use designated parts only

The set’s components possess important safety 
characteristics, such as noncombustibility and 
the ability to tolerate large voltages.  Be sure that 
replacement parts possess the same safety charac-
teristics as the originals. Also remember that the 

 mark, which appears in circuit diagrams and 

parts lists, denotes components that have particu-
larly important safety functions; be extra sure to 
use only the designated components.

3. Always follow the original design 

when mounting parts and routing 
wires

The original layout includes various safety fea-
tures, such as inclusion of insulating materials 
(tubes and tape) and the mounting of parts above 
the printer board. In addition, internal wiring has 
been routed and clamped so as to keep it away 
from hot or high-voltage parts. When mounting 
parts or routing wires, therefore, be sure to du-
plicate the original layout. 

4. Inspect after completing service

After servicing, inspect to make sure that all 
screws, components, and wiring have been 
returned to their original condition. Also check 
the area around the repair location to ensure that 
repair work has caused no damage, and confirm
safety.

5. When replacing chip components...

Never reuse components. Also remember that 
the negative side of tantalum capacitors is easily 
damaged by heat.

6. When  handling  flexible  print 

boards...

  The temperature of the soldering-iron tip 

should be about 270°C.

z

z

z

z

z

  Do not apply the tip more than three times to 

the same pattern.

  Handle patterns with care; never apply force.

Caution: Remember that hard disk drives are 
easily damaged by vibration. Always handle 
with care.

ATTETION AU COMPOSANT AYANT

RAPPORT

À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFÉS PAR UNE
M A R Q U E     S U R   L E S   D I A G R A M M E S
SCHÉMATIQUES ET LA LISTE DES PIÈCES
SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES
COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉSDANS
CE MANUEL OU DANS LES SUPPÉMENTS
PUBLIÉS PAR SONY.

The components identified by mark     contain
confidential information.
Strictly follow the instructions whenever the
components are repaired and/or replaced.

Summary of Contents for VAIO VPCEG Series

















Reviews: