manualshive.com logo in svg

Sony VAIO VGN-X505VP, Hardware Manual

Share
Download
Sony VAIO VGN-X505VP Hardware Manual Download Page 16

15

n

N

Using your VAIO computer

Hardware Guide

Using the battery pack

You can use one battery as a source of power. The battery pack supplied with your computer is not fully charged at the time of 
purchase.

Inserting the battery pack

To insert the battery, proceed as follows:

1

Turn the computer over, and slide the 

UNLOCK/LOCK

 latches on 

the bottom of the computer to the 

UNLOCK

 computer.

2

Align the grooves on the battery with the tabs on the back of the 
computer.

3

Slide the battery into the computer until it clicks into place.

4

Slide the 

UNLOCK/LOCK

 latches into the 

LOCK

 position.

✍

When the computer is directly connected to AC power and has a battery pack inserted in the battery bay, it uses power from the AC outlet.

!

Do not open the LCD screen too far. Do not allow the LCD screen to hit the stopper (1). If you open/close the display panel with force, the LCD may deform or break.

Summary of Contents for VAIO VGN-X505VP



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands