background image

47

n

N

Using Your VAIO Computer >
Using "Memory Stick"

!

Be sure to hold "Memory Stick" with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the 
media, do not force "Memory Stick" into the slot if you cannot insert it smoothly.

Before using "Memory Stick Micro" ("M2"), be sure to insert it into an "M2" Standard-size adaptor or "M2" Duo adaptor. If you insert the media directly 

into the "Memory Stick" slot without the adaptor, you may not be able to remove it from the slot.

"Memory Stick Micro" in an "M2" Duo adaptor may not operate properly if it is additionally inserted into a "Memory Stick Duo" adaptor.

To remove "Memory Stick"

!

Do not remove "Memory Stick" while the Media Access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to load, 
so make sure the indicator light is unlit before removing "Memory Stick".

1

Locate the "Memory Stick" slot.

2

Check that the Media Access indicator light is unlit.

3

Push in "Memory Stick" toward the computer and release.
"Memory Stick" ejects.

4

Pull "Memory Stick" out of the slot.

!

Be sure to remove "Memory Stick" gently, or it may pop out unexpectedly.

 

Summary of Contents for VAIO VGN-NW Series





































































































































































Reviews: