Sony VAIO VGN-FS415B User Manual Download Page 90

Page: 90 / 157

Customizing Your VAIO Computer

Using Hibernate Mode

In Hibernate mode, the state of the system is saved on the hard disk and power is turned off. Even when the battery runs
down, no data will be lost. The power indicator light is off in this mode.

To activate Hibernate mode

Press the Fn+F12 keys.

The Hibernating screen appears and the computer enters Hibernate mode.

Alternatively,

Click Start and then Turn Off Computer.

Click Hibernate.

To return to Normal mode

Turn on the computer by pressing the power button.

The computer returns to its previous state.

If you press the power button for more than four seconds, the computer will switch off automatically.

Summary of Contents for VAIO VGN-FS415B






























































































































































Search results

Summary of Contents for VAIO VGN-FS415B

Reviews:

Related manuals for VAIO VGN-FS415B

Brands by name

Popular brands

Sony VAIO VGN-FS415B, User Manual

Search results

Summary of Contents for VAIO VGN-FS415B

Reviews:

Related manuals for VAIO VGN-FS415B

Brands by name

Popular brands