Sony VAIO VGN-FJ340FP User Manual Download

Page: 114 / 167

114

Troubleshooting

What should I do if a BIOS error appears when I turn on my computer?

If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of your computer screen, follow these steps:

Press the F2 key.
The BIOS setup screen appears.

Set the date (month/day/year). Press the Enter key.

Press the

key to select System Time, and then set the time (hour: minute: second). Press the Enter key.

Press the

key to select the Exit tab, and then press the F9 key.

The message Load default configuration now? appears.

Select Yes, and press the Enter key.

Select Exit (Save Changes) or Exit Setup, and press the Enter key.
The message Save configuration changes and exit now? appears.

Select Yes, and press the Enter key.
Your computer restarts.

If this occurs frequently, contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony online
support Web site.

Summary of Contents for VAIO VGN-FJ340FP








































































































































































Search results

Summary of Contents for VAIO VGN-FJ340FP

Reviews:

Related manuals for VAIO VGN-FJ340FP

Brands by name

Popular brands

Sony VAIO VGN-FJ340FP, User Manual

Search results

Summary of Contents for VAIO VGN-FJ340FP

Reviews:

Related manuals for VAIO VGN-FJ340FP

Brands by name

Popular brands