Sony VAIO VGN-FJ100 Series User Manual Download Page 115

Page: 115 / 170

115

Troubleshooting

What should I do if the message "Operating system not found" appears when my
computer starts, and why won't Windows start?

❑

Make sure the computer does not have a "non-bootable" floppy disk in the floppy disk drive (if applicable).

❑

If a non-bootable floppy disk is in the drive:

Remove the floppy disk.

Restart the computer and confirm that the Microsoft Windows operating system starts properly.

❑

If the Windows operating system still does not start, follow these steps to initialize the BIOS:

If there is a disk in the floppy disk drive, remove it.

Turn off the computer.

Remove any peripheral devices connected to the computer.

Restart the computer.

Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears.

Press the

key to select the Exit menu.

Press the F9 key.
The message Load default configuration now? appears.

Select Yes, and press the Enter key.

Select Exit (Save Changes), and press the Enter key.
The message Save configuration changes and exit now? appears.

10 Select Yes, and press the Enter key.

The computer restarts.

Summary of Contents for VAIO VGN-FJ100 Series











































































































































































Search results

Summary of Contents for VAIO VGN-FJ100 Series

Reviews:

Related manuals for VAIO VGN-FJ100 Series

Brands by name

Popular brands

Sony VAIO VGN-FJ100 Series, User Manual

Search results

Summary of Contents for VAIO VGN-FJ100 Series

Reviews:

Related manuals for VAIO VGN-FJ100 Series

Brands by name

Popular brands