manualshive.com logo in svg

Sony VAIO VGN-A600 Series, User Manual, Page: 103 / 269

Share
Download
Sony VAIO VGN-A600 Series User Manual Download Page 103

To connect a parallel port printer 

1.

Plug the printer cable into the Printer port 

on your computer or port replicator, if applicable. See 

Locating

Controls and Ports

 for more information. 

2.

Plug the other end of the printer cable into the port on the printer. 

3.

Restart your computer by clicking 

Start

, 

Turn Off Computer

, and 

Restart

. If the 

New Hardware Wizard

appears, follow the on-screen instructions. 

4.

Make sure the computer recognizes the printer. Follow these steps: 

Click 

Start

, 

Control Panel

, 

Printers and Other Hardware

, and then 

Printers and Faxes

.

If the computer recognizes the printer, it will be listed in the 

Printers and Other Hardware 

window.

If the computer does not recognize the printer, you may need to install the printer driver software. See
the guide that accompanied the printer for more information. 

  Connecting a Parallel Printer 

  

 See the guide that accompanied the printer for more information on its installation and use. 

Page  103

Summary of Contents for VAIO VGN-A600 Series














































































































































































































































































Reviews:

No comments