Sony VAIO VGC-RC110G Series User Manual Download

Page: 139 / 180

139

Troubleshooting

What should I do if a BIOS error appears when my computer starts?

If the message "Press F2 to setup" appears at the bottom of the screen

Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears.

Press the

key to select the Exit menu.

Press the

key to select Load Optimal Defaults.

Press the Enter key.
The Load Defaults? window appears.

Press the Y key on the keyboard and press the Enter key.

Select Exit Save Changes and press the Enter key.
The Exit Saving Changes? window appears.

Press the Y key on the keyboard.
The computer restarts.

If this occurs on a regular basis, contact an authorized Sony Service Center. To find the nearest center or agent, visit the
Sony online support Web site.

Summary of Contents for VAIO VGC-RC110G Series





















































































































































































Search results

Summary of Contents for VAIO VGC-RC110G Series

Reviews:

Related manuals for VAIO VGC-RC110G Series

Brands by name

Popular brands

Sony VAIO VGC-RC110G Series, User Manual

Search results

Summary of Contents for VAIO VGC-RC110G Series

Reviews:

Related manuals for VAIO VGC-RC110G Series

Brands by name

Popular brands