Sony VAIO VGC-RC110G Series User Manual Download

Page: 138 / 180

138

Troubleshooting

Computer

What should I do if my computer won't start?

❑

Make sure the computer is securely plugged into a power source and turned on. Make sure the VAIO power indicator
shows the power is on.

❑

Make sure the optical disc drive (if applicable) is empty.

❑

If the computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS is
plugged into a power source and turned on.

❑

Confirm that the external monitor is plugged into an appropriate power source and turned on.

❑

Make sure the brightness and contrast controls are adjusted correctly.

❑

Condensation may cause the computer to malfunction. If this occurs, do not use the computer for at least one hour.

❑

Remove any extra memory modules you may have inserted since purchase.

❑

Confirm that the computer is not in Standby mode by pressing any key on the keyboard.

Summary of Contents for VAIO VGC-RC110G Series





















































































































































































Search results

Summary of Contents for VAIO VGC-RC110G Series

Reviews:

Related manuals for VAIO VGC-RC110G Series

Brands by name

Popular brands

Sony VAIO VGC-RC110G Series, User Manual

Search results

Summary of Contents for VAIO VGC-RC110G Series

Reviews:

Related manuals for VAIO VGC-RC110G Series

Brands by name

Popular brands