Sony VAIO VGC-RA920G Series User Manual Download

Page: 100 / 164

RAID Glossary

This glossary contains some basic terms that may aid your understanding of RAID technology.

Term

Definition

Array

Two or more hard disk drives that are grouped together and function as a single drive to the

host computer.

Fault tolerance

The ability of a computer to continue its function, even after one or more hard disk drives have

failed.

Intel

Application Accelerator RAID edition (IAA)

Software program that replaces the original ATA drivers provided with

the Microsoft

Windows

operating system. The IAA replacement drivers are optimized for computers using certain Intel

chipsets.

Logical drive

Two or more hard disk drives that are grouped together so that they appear and function as a

single or logical drive to the host computer.

Mirrored/Mirroring

All data on a primary hard disk drive is duplicated on a secondary drive, to provide data

protection.

Parity

A type of data protection that uses verification to detect errors in data.

Physical drive

The actual hard disk drive.

RAID

An acronym for "Redundant Array of Independent Disks". This method of combining small,

inexpensive hard disk drives offers advantages for data availability, equipment cost, and system performance.

RAID-0

See "Striped/Striping"

RAID-1

See "Mirrored/Mirroring"

Redundant
(Information Technology use)

Additional computer components, such as hard disk drives, that are installed to back

up the primary resources in case of failure.

S-ATA

An acronym for "Serial Advanced Technology Attachment." This is a standard uses serial

signaling technology and is used for connecting hard disk drives into computers.

Striped/Striping

Data is spread evenly over multiple hard disk drives for improved system performance. There

is no data protection.

Page 100

Summary of Contents for VAIO VGC-RA920G Series





































































































































































Search results

Summary of Contents for VAIO VGC-RA920G Series

Reviews:

Related manuals for VAIO VGC-RA920G Series

Brands by name

Popular brands

Sony VAIO VGC-RA920G Series, User Manual

Search results

Summary of Contents for VAIO VGC-RA920G Series

Reviews:

Related manuals for VAIO VGC-RA920G Series

Brands by name

Popular brands